Thank you for purchasing the IK-WB30A Network Camera. Before you start using the camera, read this Toshiba Network Camera IK-WB30A User's Manual carefully to ensure correct usage. Minimum object illuminance: 0.04 lux / F1.4 (Night mode, Max gain 4x, Exposure time 1/30); 0.01 lux/ F1.4 (Night mode, Max gain 8x, Exposure time 1/5).Protocols: TCP/IP, HTTP, UPnP, RTSP/RTP/RTCP, IGMP, SMTP, FTP, DHCP, NTP, DNS, DDNS, PPPoE, SNMP. Network interface: 10Base-T/100Base-TX, RJ45 connector, IEEE 802.3af (PoE compatible). Image compression system: JPEG, MPEG4. Image quality setting: 6 levels. Image pickup device: 1/3.2 inch (4:3), CMOS Digital Image Sensor. To view the MPEG-4 streaming media using RTSP players, you can use players that support RTSP streaming. The reset button is used to reset the system or restore the factory default settings. Sometimes resetting the system can return the camera to normal operation. If the system problems remain after resetting, restore the factory settings and install again. This network camera is compliant with SD/SDHC 16GB / 8GB and other preceding standard SD cards for local storage. TOSHIBA offers an easy-to-use user interface that helps you set up your network camera with minimal effort. To simplify the setting procedure, two types of user interfaces are available: Advanced Mode for professional users and Basic Mode for entry-level users. Some advanced functions (HTTPS/Access list/Homepagelayout/Application/Recording/System log/View parameters) are not displayed in Basic Mode.